Power Line Carrier Mini Receiver
The Steffes Power Line Carrier (PLC) Mini Receiver is a device used for the control of electrical circuits. It receives control signals through the power lines from either the Steffes Power Line Carrier (PLC) Transmitter or Comfort Control Relay Panel (CCRP). When the Mini Receiver receives a signal, its relays will respond to control the devices connected to them. This type of control can minimize the overall cost of controlling electrical devices.
Common Applications:
-
ETS heater control
-
Water heater control
-
Baseboard control
-
Electric furnace control
-
Dishwasher control
-
Hot tub control
-
Dryer control
-
Ceiling and floor cable control
-
Control of just abut any electrical devices
Specifications:
-
Multiple configurations available
-
Single pole — one (1) relay to control one electrical circuit
-
Double pole — two (2) relays to control two (2) separate electrical circuits
-
Six pole — six (6) relays to control up to six (6) separate electrical circuits
-
30 AMP, DC held, board mounted relays (pre-wired with 10 AWG leads)
-
Receives peak and/or anticipated peak (pre-peak) control signals through the power lines from a Steffes PLC transmitter system
-
15 selectable communication channels
-
Capable of controlling a device on rate/control strategy separate from the master control
-
Indoor, flush mounted, metal enclosure with power company seal/lockout provision
-
Single or double pole configuration: 6" x 6" x 3" (outdoor enclosure available as special factory order)
-
Six pole configuration: 10" x 13 ½" x 4"
-
Operates on 120V or 208V/240V, single phase
-
Indicator lights to monitor PLC operation or relay status
-
60-minute peak override module (optional, power company permitting)
See also other Steffes Accessories
Visit our downloads page for more PLC Mini Receiver information.